Test your motor system without using a transmitter and receiver. The SerCon can be used to test servos and throttle control on ESC's.
Features
- Manual mode: turn the knob with different speed, check the reaction time.
- Neutral mode: make the servo go back to the neutral point.
- Automatic 'window wiper' mode: Servo swings like 'window wipers' to their full angles.
- Connect up to 1-3 servos simultaneously
- Test 1-3 servos consistency.
- Connect 1-3 ESC's & test and compare reaction time respectively.
- Connect 3 servos of the CCPM helicopters and select servos.
Another new little item that will save you a ton of headaches.
Are you tired of breaking off your servo mounting tabs? Use some of our aluminum servo clamps and never have to deal with that again.
Another new little item that will save you a ton of headaches.
Are you tired of breaking off your servo mounting tabs? Use some of our aluminum servo clamps and never have to deal with that again.
When it comes to your big RC projects, size does matter - that’s why Hitec engineered the HS-5765MH.
This high voltage cousin of our popular HS-5755MG is 2-cell LiPo (7.4V) capable and features heavy duty, metal gears with a 10mm output shaft for the strength you need for the most demanding large scale applications.
The "Ultra Torque" HS-7950TH is designed to operate on a 6 volt or a two cell LiPo receiver pack.
With "indestructible" Titanium gears.
The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market.
The HS-5805MG is the digital sibling of the HS-805MG and just like the HS-805MG it was designed to handle the punishment dished out by the latest wave of big vehicles.
This servo will fit the HPI Baja without the need for any adapters.
Built big and tough, the HS-5805MG adds the massive holding torque and the programmability of our digital circuit.
The HS-805MG heavy duty supersized servo was designed to handle the punishment dished out by the latest wave of large 1/5th scale vehicles.
This servo will fit the HPI Baja without the need for any adapters.
With big gears in a big case powered by a big motor this servos was designed to take abuse and keep on going.
Is this the best steering servo you can get for a large scale car?
We think so!!!
The new SA1283SG has some great features for those applications that are particularly hard on servos. This standard size servo produces 30kg of force at 6V and has a proven steel gearbox to back up that force. It also features a metal mid and top case that ensures the gear will remain in place under maximum load.
Extremely powerful with 30kg-cm torque.
Speed (sec/60°): 0.13
Torque: 30.0Kg
The new SC-1256 standard size coreless digital servo is leading edge technology with super high 12 bits resolution and super strong Titanium Gears.
Extremely powerful with 20kg-cm torque.
- Speed (sec/60°): 0.15
- Torque: 20.0Kg
The new SC-1257 standard size coreless digital servo is leading edge technology with super high 12 bits resolution and super strong Titanium Gears.
- Speed (sec/60°): 0.07
- Torque: 10.0Kg
The new SC-1258 standard size coreless digital servo is offers fast speeds offering 12kg high torque without any loss of performance.
- Speed (sec/60°): 0.08
- Torque: 12Kg
Savox have now released their new 'High Voltage' servos that can be powered straight off the battery, eliminating the need for a voltage regulator!
They also work great off regular 6V battery packs.
- Speed (sec/60°): 0.095 @7.4V
- Torque (kg-cm): 21 @7.4V
Savox have now released their new 'High Voltage' servos that can be powered straight off the battery, eliminating the need for a voltage regulator!
They also work great off regular 6V battery packs.
- Speed (sec/60°): 0.11 @7.4V
- Torque (kg-cm): 26 @7.4V
Micro size digital servo with refined design that brings out extraordinary performance.
Great steering servo for Micro 1/18 cars.
- Speed (sec/60°): 0.09
- Torque (kg-cm): 2.2
Savox have now released their new 'High Voltage' servos that can be powered straight off the battery, eliminating the need for a voltage regulator!
They also work great off regular 6V battery packs.
- Speed (sec/60°): 0.15 @7.4V
- Torque (kg-cm): 35Kg @7.4V
This is a straight swap for the HPI baja SFL-10MG and does not require the servo adapter mount bracket.
Savox have now released their new 'High Voltage' servos that can be powered straight off the battery, eliminating the need for a voltage regulator!
They also work great off regular 6V battery packs.
- Speed (sec/60°): 0.17 @7.4V
- Torque (kg-cm): 40Kg @7.4V
This is a straight swap for the HPI baja SFL-10MG and does not require the servo adapter mount bracket.
