The Bumble Bee Nitro Kill Switch™ will automatically stop the fuel flow to your nitro engine during: radio glitch/signal loss, low battery, cut wires, or total battery power loss.
You can also kill the engine any time you want by pressing the Aux button on your transmitter, or turning off the transmitter power button.
No more plugging the exhaust, jamming up the flywheel, or pinching the fuel hose.
Add the Buzzer to your Killer Bee (v1, v2, v2-s, etc) to enable the audible alarm feature of the Killer Bee.
The Buzzer will sound when you have left the receiver power on and turned transmitter power off, which will keep you from damaging servo's by leaving the receiver in failsafe mode.
The Buzzer will also sound when the engine is killed, reminding you to flip the 3rd channel switch on your transmitter.
Without a remote kill switch a radio glitch, failed servo, frozen carb, or stuck throttle linkage can result in a runaway vehicle, which can cause expensive vehicle, engine, property, and even human damage. A Killer Bee will keep this from happening to you.
The Killer Super Bee is designed to be the ultimate gas R/C kill switch/failsafe.
The 7" Remote LED makes it easier to see what mode the Killer Bee is in. Includes LED lens.
Drill 1/4" hole in battery box lid and insert LED into lens. Add some Shoe Goo on the underside of the lid to secure the LED and lens.
The 7" Remote LED makes it easier to see what mode the Killer Bee is in. Includes LED lens.
Drill 1/4" hole in battery box lid and insert LED into lens. Add some Shoe Goo on the underside of the lid to secure the LED and lens.
