O-RING (50X2.6MM/BLACK/4PCS)
FOR 15411 AIR FILTER
85444 - AIR FILTER SLEEVE SET (FOR #15411)
Chung Yang full-shield performance airfilter.
Use with optional AF310 velocity stack.
DDM velocity stack with 5/8" inner diameter.
This adapter allows you to use aftermarket clamp-style air filters with 1 3/4" inner mounting diameter.
Precision machined for smooth air flow. 3/4" height yeilds better low end power than stock. Dual outer grooves for sturdy clamp mounting.
Fits Walbro WA / WT / WYK style carburetors.
The DT-1 Foam Filter Cleaner can be used on any quality foam filter.
The large 1 quart size (1 Litre) and resealable container is a must for avid large scale drivers of all types. No more tiny bottles or spray cleaners than run out quickly.
Buy in bulk and save.
The DT-1 Foam Filter Oil can be used on any quality foam filter.
The large 1 quart (1 Ltr) size and resealable container is a must for avid large scale drivers of all types.
A common practice used by top professionals is to fully immerse your filter in oil and with the standard spray bottle or small containers currently available it makes that very difficult if not impossible.
DT1 has quickly become the filter of choice by many profesional teams in all types of motor sports.
Dyno tests have show superior performance over other brands of foam filters and most importantly, they run cleaner.
GBE's innovative new billet velocity stack for the HPI Baja 5b/5T is much better than the stock plastic setup for the following reasons.
- As it is made of billet aluminum, it will not warp.
- Filter has been moved up slightly, so the filter is easier to remove. Also, installation of redneck or outerwears prefilters is made much, much easier with the extra space.
- Air volume is increased, so more air is accessible to the engine at initial throttle.
Fits HPI Baja 5B/5T with STOCK FILTER ONLY. Will not work with aftermarket filters.
Use HPI Engine Air Filter Oil to properly maintain your nitro engine - just a few drops after cleaning your air filter will keep it in top shape and ready to protect your engine from dangerous dust and dirt particles.
Every few runs, just clean your air filter with fresh nitro fuel, let it dry and re-oil with this perfectly formulated air filter oil - this will make sure your air filter is working to its full potential and properly protecting your engine.
The Losi 5IVE-T does not allow for a lot of room for larger filters due to the limited space between the carburator and the roll cage. So DT-1 made an extra wide and low profile filter so bashers and racers alike can get the maximum air flow while also offering the best engine protection on the market.
This low profile foam filter is built with the famous and proven 3 stage foam our industry has become to trust in the most demanding conditions.
Replace your single stage inside filter from your Losi 5IVE-T with this red colored filter from DT-1. Get ulimate protection for your engine with this affordable high performance filter.
Replace your single stage outer filter with this double stage DT-1 filter on your Losi 5IVE-T stock filter unit. Now your unit will have 3 layers of different filtering allowing for the ulimate in protection for your engine while also offering the most breathability. All in this affordable high performance filter.
Outerwears brand pre-filter. 3" diameter, 2.5" height. Elastic-cinch base for a secure fit.
A must-have for operating in dirty or dusty conditions!
Get the new Outerwears Pre-Filter designed for TGN.
Fits on the TGN Short Stack UniFilter with TGN RedNeck and on the standard Losi 5ive air filter.
Great for drivers out in the sand and light dust areas
TGN is proud to introduce our new pre-filters made by Outerwears for the DT1 Large Scale R/C Filters.
When DT1 teamed up with TGN to bring an exclusive line of foam filters to the Large Scale industry we knew you were going to want to protect your investment with a pre-filter.
Using Terra-Flow standards Outerwears has designed this new pre-filter to protect your DT1 air filter and the inside of your power plant from dirt, debris, and water while allowing maximum air flow that Outerwears is known for.
Available in: Black
The result of RB's long experience on racing tracks, this brand new filter oil meets all the needs of nitro engine racing under different track conditions.
New from RC-Skin, high quality Air Pre-Filters.
Protect your engine with an extra layer of defense against dust, sand, dirt, and mud!
TeamPhatDadrc ShreadStack (AKA Velocity Stack) for your HPI BAJA RTR, SS, 2.0 and 5-T was designed and tested buy Team Manager Rodney "ShreadHead" Ketcham.
The Inclined ShreadStack allows for easy access for filter servicing. This beautifully machined part comes with all the hardware and gaskets needed.
Designed for use with stock filter.
The TGN Easy Clearance Air Filter has been designed for the best in air flow and clearnace on your HPI Baja 5B/5T.
Made with the great quality of UNI-Filter. Dont get your throttle linkage snagged on your aftermarket filter anymore. Works with most aftermarket Velocity Stacks.
Double your protection with the TGN Thin Red Neck (Part # af331).
Originally designed for the TGN Easy Clearance Air Filter (Part # af330).
TGN is answering the call of many customers wanting the great TGN Redneck but without the bulkiness snagging the linkage or taking up so much room inside the rollcage. The TGN Single Stage Thin Layer Redneck is perfect for those who prefer running the stock foam filter too.
Slap an Outwears Pre-Filter on there also for the ultimate protection available.
