Alloy Horn for Multiplex RHINO Digi 4 Servo. Also fits Hitec HS-5755MG servo. Unlike stock plastic arms, this one is just about indestructible, an almost essential addition to a servo of this type.
Machined in the USA of 6061 billet aluminum.
Bullet Hole Stickers. Attach them to the body of any R/C vehicle for a cool look!
Complete set of DDM Hex Driver Bits, including 5 standard bits (2mm,2.5mm,3mm,4mm,5mm) and 3 ball-end bits (3mm,4mm,5mm).
Includes both types of handles (standard, and magnetic 2-in-1 T-handle for extra torque), as well as 2 extra socket holders for your drill
Everything you need to complete a great hex tool set for your HPI Baja, Losi 5ive, Redcat, FG, MCD, etc.
Top-quality DDM receiver battery for large scale R/C vehicles such as Losi 5ive, FG Modellsport, Carson, Firehammer, Etc. 6v, 4600mAh NiMH hump pack.
Allows for more than double the drive time of the stock battery pack!
DDM 2-in-1 Hex Driver Handle for 1/4" Drivers.
This weighted, magnetic bit handle will give you all the flexibility you need. Use it as a regular handle, or but the bit in the middle to increase leverage. The hex driver bits are held into place by a magnet in the center of the handle.
These handles fit our DDM hex drivers of both types (standard and ball end). Make your job easy and swap out bits in seconds!
Note: This is the handle only, drivers (bits) are sold separately
Set of three hardened steel allen bits for electric drills and hand tools.
Each bit is 6.25 inches (160mm) in length. These are 1/4" shaft size, and compatible with electric drills and hand tools that accept 1/4" bits.
Sizes include 3.0 ,4.0, 5.0mm
Note: Ball ends allow for working at angles, but are not as strong as the standard straight design. It is possible to break a ball end if too much pressure is used.
Set of five hardened steel allen bits for electric drills.
Each bit is 6.25 inches (160mm) in length. These are 1/4" shaft size, and compatible with electric drills and hand tools that accept 1/4" bits.
Sizes include 2.0, 2.5 ,3.0 ,4.0, 5.0mm
DDM billet aluminum fan cover for large scale gas RC vehicles and gas scooters. Much stronger than stock cover. Features reinforced mounts for extra durability.
Available in polished finish, or choice of anodized color.
Compatible engines: Fits Zenoah G230RC / G260RC engines, and Chung Yang CY23RC (stock Baja 5b engine) / CY26RC / CY27RC / CY29RC / GP290 engines.
This is a perfect upgrade for your R/C body - edge trim!
Gets rid of those sharp edges, and looks fantastic. T his trim has a segmented steel core for extra durability, and works well on the edge of any R/C lexan body.
Perfect for HPI Baja 5T/5SC, but works on virtually anything.
DDM aftermarket carburetor spacer fits Walbro WT series carburetors. Fits between carburetor and valocity stack or air filter to allow carburetor choke plate to fully open.
Functions same as Zenoah # T2070-82510
FG part # 07354/8
DDM Dominator® brand pipe silencer. Available in chrome or carbon finish. Mounts to most tuned pipes with 5/8" bleed to reduce noise.
Includes silencer, heavy-duty mounting tube, and clamps.
Will not work on stock mufflers, or with Jet-Pro pipes with integrated silencers, ROC, Extreme Toys, GSR pipes, or pipes for the GP420 / GP460 engine.
Will work with pipes: ADA S1, ADA S2, Engine Trix, Sikk Torque Pipe, Sikk M1 Pipe, PPS Pipe, Flowsystem Pipe, PacSales S25 Pipe, DDM Dominator for HPI and FG vehicles. Also fits Proline Racing 'rattlesnake' pipes when mounted to the 5/8" rattlesnake 'stinger'.
The length of the silencer body is 108mm, and the width is 38mm.
New from DDM!
Developed through months of extensive in-house testing and prototyping, and custom-designed for maximum RC performance, these new Dominator® "FAST" pipes for your HPI Baja 5b gas buggy will give you the power you crave.
Developed through months of extensive in-house testing and prototyping, and custom-designed for maximum RC performance, these new Dominator® top-end pipes for your FG vehicle will give you the power you crave.
New from DDM!
Developed through months of extensive in-house testing and prototyping, and custom-designed for maximum RC performance, this new Dominator® pipe for your Redcat Rampage Truck or Buggy will give you the power you crave.
Pipe volume is optimized for huge power gains on both bottom and top end!
New from DDM!
Developed through months of extensive in-house testing and prototyping, and custom-designed for maximum RC performance, these new Dominator® V2 pipes for your HPI Baja 5b gas buggy will give you the power you crave. Gives snappy low-end response, yet still offers unmatched top-end performance!
New from DDM!
Developed through months of extensive in-house testing and prototyping, and custom-designed for maximum RC performance, these new Dominator® V2 pipes for your HPI Baja 5b gas buggy will give you the power you crave. Gives snappy low-end response, yet still offers unmatched top-end performance!
This is the silenced version of the pipe - includes a silencer with adjustable tip that can be rotated any direction you like.
Set of six (6) hardened steel TORX star bits for electric drills. Sizes include:(T10, T15, T20, T25, T27, T30)
Each bit is 6.25 inches (160mm) in length. These are 1/4" shaft size, and compatible with electric drills and hand tools that accept 1/4" bits.
The DDM hand tools ( part numbers ca197a and ca197b) are fully compatible.
DDM Hex Bit Holder w/Handle for 1/4" Drivers.
These nice handles fit our DDM hex drivers of both types (standard and ball end). Make your job easy and swap out bits in seconds!
Note: This is the handle only, drivers (bits) are sold separately
How Cool are these!!
DDM Racing HPI Baja Keychain. Zinc Die-Cast with a professional, shiny exterior appearance.
Dimensions are 2.5" long x 1" tall (65mm x 25mm). Thickness is 2mm.
DDM Socket Holder Adapter for 1/4" Hex Drivers.
These fit both types of our 1/4" drivers (standard and ball-end) and give you greater flexibility when working with your drivers. You can insert this holder into your drill or hand-tool and quickly replace bits by just pulling them out, making your job faster and easier.
Set of 84 stainless steel beadlock bolts for HPI Baja 5B/5T Wheels. M3 x 10mm size (same as HPI part # z340). To replace the beadlock bolts on all 4 wheels on your Baja, 80 bolts are required. We include 84 in this set so you are left with a few extras.
Strengthen your wheels, and add some bling at a great price!
Note: These bolts do not fit Pro-Line brand wheels.
DDM high-performance silicone exhaust tubing. 1/2" inner diameter, 3/4" outer diameter. Includes mounting clamp.
Inner reinforcing fibers for extreme durability. Allows you to route your exhaust freely.
Also provides SIGNIFICANT noise reduction when connected to stock mufflers or tuned pipes.
Can be trimmed to any desired length - significant noise reduction can be achieved using only a few inches of tubing.
Complete hardware kit for DDM Dominator® rear-mount exhaust pipes.
Inclues X-port billet exhaust header spacer, bolts, gaskets, and spacer.
X-port billet exhaust header spacer. 4mm thickness. Installs between the cylinder and DDM Dominator® pipe for HPI Baja 5b.
Finned design reduces exhaust header temperature.
Fits Zenoah and Chung Yang engines.
